23-Piece FWD Front Wheel Drive Bearing Removal Kit, Steel Adapter Puller Press Replacement Installer & Removal Tools
ALL-IN-ONE KIT: This durable bearing kit is complete with everything you need to properly install and remove wheel bearings in a safe and effective manner. Replace wheel bearings with ease while keeping the steering knuckle and strut assembled intact on the vehicle.
STEEL BUILD: All parts are made of premium steel and coated in black-oxide to avoid rusting over time. Avoid using an impact wrench. May cause damage to nuts or bolts. Make this kit apart of your collection of tools for years to come!
COMPATIBLE VEHICLES: This kit can be used universally and is designed for front-wheel-drive cars and small trucks. You only need one kit for all your vehicles!
INNOVATIVE TOOLS & Case: No more need for front end alignment when service work is done. Reduce your time spent removing or installing your wheel bearing! Keep the tools protected in the custom blue carrying case. Store all the tools together and easily transport them when needed.
WARRANTY: This wheel bearing set is backed with a 2-year OMT warranty. Our professional-grade tools are premium quality and have been trusted by car owners across the country.
Step.1 Determine if the vehicle has a trapped rotor or a floating rotor.
Step.2 Assemble the tool components and press out the worn bearing.
Step.3 Lightly lubricate the new bearing and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms.
Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
Step.5 Assemble tool components. Lightly oil the hub assembly and install the hub. Attention: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1) lower ball joint to steering knuckle assembly brake rotor. (2) disc brake caliper. (3) outer tie rod nut and tie rod. (4) axle nut. (5) front tires.
Adapter Drift sizes Approx.: 50mm, 55mm, 60mm, 64mm,67mm, 70mm, 72mm, 74mm, 75mm, 78mm, 82mm, 84mm, 88mm. Receiver Sleeves sizes Approx.: 102mm, 91mm, 86.3mm, 76mm. Drive Shaft: 32mm and 38mm
Application: fits front-wheel-drive cars and small trucks
Material: carbon steel for tools, ABS plastic for the case
Dimensions: 17.7 x 12.2 x 4.1 in.
Item Weight: 24 lb.