4pc 5x4.5 / 5x114.3 Wheel Spacers Adapters 1.5" with 1/2-20 Studs, for Ford Ranger Explorer Jeep TJ KJ KK ZJ

5x4.5" (114.3mm) to 5x4.5" (114.3mm) PCD (Vehicle/ Wheel Bolt Pattern), 1/2"-20 Thread Pitch (34 ± 0.3 mm Thread Length), 3.25" (82.5mm) hub bore, 4pcs 1.5"

ORION MOTOR TECH WHEEL SPACERS will widen your car's wheelbase, improving grip, handling, and precision. Developed in a special aluminum alloy through an innovative forging technology, afterwards they are wrought with CNC machine (computer numerical control) to obtain the perfect coplanar surface. They are heat treated to increase the mechanical resistance and next they are anodized to get the oxidation protection. The wheel spacers increased the track improving the driving precision.

PACKAGE INCLUDES

• 4 x wheel spacers (1.5" per unit)
• 1 x high strength thread-locking (red),
• 1 x user manual.

PLEASE MAKE SURE

• 1. Spacers' PCD/ Bolt Pattern 5x4.5" (114.3mm) = Your Vehicles' / Wheels'
• 2. Spacers' Thread Pitch 1/2"-20 = Your Vehicles' / Wheels'
• 3. Spacers' Thread Length 34 ± 0.3 mm >= Your Vehicles'
• 4. Spacers' Hub Bore 3.25" (82.5mm) >= Your Vehicles'
• OR check the model compatibilities below.

IMPORTANT NOTES:

Professional installation recommended. Alignment is necessary after installation, this will prevent any wobble and vibration from occurring. Avoid an impact wrench; improper usage may cause lug nuts/bolts to break or loosen while driving, it will take potentially accident or injury. Make sure you get 5-7 turns before tightening. Retorque all lug nuts / bolts after 25-50 miles of driving, then again 1-2,000 miles. The back of the adapter must sit flush against the vehicles hub. No rust on the inner of hub and wheel while installing the Hub centric wheel spacers. If the studs do pass the face of the adapter, you will need to grind/cut them shorter. (This only applies to 1.5" adapters & smaller).