Unlock Your Voice
We highly value customers opinion and feedback. To help more customers understand the quality of our products and services, we sincerely invite you to share your valuable experience on Trustpilot.
Excellent quality. I used it to replace the ball joints on my Dodge Ram 1500, and it worked perfectly. It made the job much easier and more efficient. Highly recommended.
Good quality kit, had everything I needed to remove and install new ball joints in my Grand Cherokee ZJ; the plastic case it comes in is super nice and the overall quality of the product is very high, just make sure to grease up the threads on the tool and when removing old ball joints take a mini maul or similar to break them loose from the knuckles otherwise you will damage this tool, eye protection is recommended.
It worked! Did the ball joints on my 2011 Jeep Wrangler. Getting the whole ball joints out was intense. I would tighten this as tight as I can get it with a 2 ft breaker bar and then slam the knuckle with a hammer and let it pop and then tighten more and hit it with the hammer again bang the ball joint would eventually pop out all the way. There were a few moments when I thought I was going to permanently bend the c-clamp but it held up through removal of all four and installation of the four new ones. Very pleased.
I used it, very good.
Reallt for heavy duty
this is by far the best value for the piece count kit i could find and the quality of the parts are good. i banged on it with a hammer taking out 30 year old rusted u-joints and it held up just fine.