Introduction
A careless driver bumps into your vehicle, leaving behind an ugly dent that needs urgent repair. It looks bad, doesn't it?
But how would you react if we told you that you could fix the dent yourself instead of getting it done from an expensive auto body shop and breaking the back? All you need is a little knowledge of the process and the right tools.
So, get your DIY (Do It Yourself) game on as well to help you through the process of how to use a dent removal tool, get that dent fixed, restore the previous appearance, and save thousands of dollars on car repair.
Putting Your Dent Removal Tools To Work
It is a practical and rewarding way to fix dents and dings in your vehicles using different dent removal tools. The process is referred to as “Paintless Dent Repair (PDR),” where you remove dents without damaging the paint.
Here's a step-by-step guide on how to get those dent removal with a dent removal tool.
Step 1: Assess the Damage
The first step is for you to look at the damage closely as the assessment of size, depth, and location of the damage is necessary for selecting the tools and techniques required for the job.
You may have to carry out additional repairs if the paint is cracked or chipped.
Step 2: Gather Your Tools
The next step is to collect the tools required for the job, but you may find yourself asking what the best dent removal tool is. Typically, you will need the following items for a dent removal job.
- Cleaning Cloth and Spray Bottle: The spray is used to clean the dent before and after the repair.
- Tabs: They come in different sizes and are used to pull the dent out. You should have a wide range of options to select from.
- Tap Down Tools: They smooth out the area after the dent gets removed.
- Dent Pulling Tools: These "pullers" get attached to the dent and pull it out.
- Hot Glue Gun: It is attached to the tabs of the dented area.
- Rubber Hammer: A rubber hammer is helpful for tapping down high spots after the dent is pulled.
Step 3: Prepare the Area
Start by cleaning the dented area with a cloth and some mild cleaner to remove any dirt or debris. This helps the tab bond with the car’s surface.
Step 4: Apply the Tab
Heat the glue and use the hot glue gun to apply a good amount of glue to the tab. Then, attach the tab by pressing it onto the center of the dent.
Hold it for a few seconds to let the glue set.
Step 5: Pull the Dent
Take your pulling tool based on the size of the dent. Remember, a three-point puller may be more effective in working on larger dents, whereas a two-point lever is usually handled for pulling smaller dings
Then, connect the pulling tool to the tab securely and pull it out by applying steady pressure. You should not yank or jerk as it can damage the bodywork even more.
Be sure to check the progress after a few pulls. You may have to reapply the tab if the results are not what you expected.
Step 6: Tap Down High Spots
You may have noticed some high spots around the area where the dent was removed. Take a rubber hammer and tap down tools to gently massage high spots back into their original place.
This step is important for getting a smooth look after the denting.
Step 7: Clean Up
If you feel you are satisfied with the repair job, it is time to add the finishing touches. You should remove the tab by pulling it carefully away from the surface.
Use a cleaning cloth and mild solvent to clean off any residual glue left on the car's surface during the bodywork.
You can effectively remove minor dents and dings from your car by following these tips and using the appropriate tools and techniques for your specific dent without spending a large sum of money on professional assistance.
Some Useful Tips
- Dent removal work requires patience and persistence. You may take several attempts to achieve the desired result. So don't expect to work wonders on the first attempt.
- You should seek professional help if the dent proves to be too difficult to fix on your own or if there is significant paint damage. Take your car to a professional dent repair service for autobody repair.
- You should avoid attempting dent removal if you're unsure about the process or in case of severe damage.
Safety Tips
There are safety measures that need to be taken when performing a task like fixing a car dent. Wearing personal Protective Equipment (PPE) such as safety glasses, gloves, and dust masks will help you avoid injury or prevent you from inhaling dust particles, which may cause allergies.
You should work in a well-ventilated area to avoid inhaling fumes coming from the glue or cleaning products. Keep your workspace clean and tidy to prevent any accidents caused by tools scattered at your workstation.
It’s important to use high-quality dent removal tools, as poor-quality tools can break and cause injury. Check the equipment before using them. , inspect all tools for damage or wear. Replace any damaged tools to prevent accidents.
The chemicals being used for fixing dents should be properly used. They should be sealed and kept in a secure location where children and pets cannot reach them.
Tackle Those Ugly Dents with Orion Motor Tech Complete Dent Kit
Orion Motor Tech is a leading name in manufacturing car dent removal tools. We have everything you need to perform a professional car dent repair in your own garage at affordable costs.
The Orion Motor Tech Complete Dent Kit is an excellent choice for those who want to fix car dents themselves. This 76-piece car dent repair kit has everything that is used to fix the appearance of not only cars but also appliances such as refrigerators.
It features three dent-pulling tools, 30 tabs, and a 100W hot glue gun with 10 glue sticks. This allows you to pull out dents without damaging your paint. The three-point puller and a single-point T-bar are perfect for fixing large dents, while smaller dings can be tackled with the two-point lever, which has an adjustable center nut.
The kit contains 30 different sizes of reinforced plastic tabs, which guarantee a successful repair.
It is a trusted option for both DIY enthusiasts and individuals looking to save costs on car repairs. Restore your car's appearance using the Orion Motor Tech Complete Dent Kit.
Final Thoughts
Fixing a car dent by yourself may seem a tedious task, but it can be a fun experience if you know how to use a dent removal tool and its techniques. You can tackle minor dents and dings without having to spend a good amount of money on professional help. Use the right equipment and follow safety protocols, and you're good to go.
